Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1

Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1: Proportional pressure regulator VPPE-3-1-1/8-6-010-E1 Nominal diameter, pressurisation=5 mm, Nominal diameter, exhaust=2,5 mm, Type of actuation=electrical, Sealing principle=soft, Assembly position=(* Any, * Preferably upright)Trang chủ

Sản Phẩm

Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1

Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1

Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1,Festo-VPPE,VPPE-3-1-1/8-6-010-E1 557772,VPPE-3-1/8-6-010 539639,VPPE-3-1-1/8-6-010Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1,Festo-VPPE,VPPE-3-1-1/8-6-010-E1 557772,VPPE-3-1/8-6-010 539639,VPPE-3-1-1/8-6-010Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1,Festo-VPPE,VPPE-3-1-1/8-6-010-E1 557772,VPPE-3-1/8-6-010 539639,VPPE-3-1-1/8-6-010

Bộ Điều Chỉnh Áp Suất Theo Tiêu Chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1

Mã sản phẩm:Festo-VPPE

Liên hệ

Đơn vị tính:CáiTình trạng:Nổi bật

Bộ điều chỉnh áp suất theo tiêu chuẩn FESTO-VPPE-3-1-1 / 8-6-010-E1,Festo-VPPE,VPPE-3-1-1/8-6-010-E1 557772,VPPE-3-1/8-6-010 539639,VPPE-3-1-1/8-6-010-E1 557772,VPPE-3-1-1/8-10-010-E1 557773,VPPE-3-1-1/8-6-420-E1 557775,VPPE-3-1-1/8-6-010-E1T 567539,VPPE-3-1-1/8-10-010-E1T 55777,VPPE-3-1-1/8-2-010-E1 557771,VPPE-3-1-1/8-2-010-E1T 557777,VPPE-3-1-1/8-6-420-E1T 567540,VPPE-3-1-1/8-10-420-E1T …

 THÊM VÀO GIỎ HÀNG MUA NGAY

FacebookTwitterGoogle+Thêm...



0985.352.995

LIÊN HỆ

 Nhân viên: Mr Giáp

 0941.99.91.91

 Nhân viên: Mr Sáng

 01688.825.381

LIÊN HỆ ZALO

Liên Hệ Zalo

Mô TảMô Tả Vắn Tắt

Specifications :

VPPE-3-1-1/8-6-010-E1 Festo Proportional pressure regulator



Property No

Product Type Festo Proportional pressure regulators

Short type code VPPE

Valve Function 3-way proportional-pressure regulator

Electrical Connect 5-pin

Electrical Connect M12

Electrical Connect Plug

Mounting With through hole

Type of reset Mechanical spring

Ambient temp 0 - 60 °C

Assembly position Any

Assembly position Preferably upright

CE mark (see declaration of conformity) to EU directive for EMC

Corrosion resistance classification CRC 2

Design structure Pilot actuated diaphragm regulator

Duty cycle 100%

Inlet pressure 1 6 - 8 bar

Linearity error in ± %FS 1 %FS

Materials information, housing Anodised

Materials information, housing Wrought Aluminium alloy

Materials note Conforms to RoHS

Max. electrical power consumption 4.2 W

Max. pressure hysteresis 0.03 bar

Medium temperature 10 - 50 °C

Nominal diameter, exhaust 2.5 mm

Nominal diameter, pressurisation 5 mm

Operating medium Filtered, unlubricated compressed air, 40 µm filtration

Operating medium Neutral gases

Operating voltage range DC 21.6 - 26.4 V

Pneumatic connection, port 1 G1/8

Pneumatic connection, port 2 G1/8

Pneumatic connection, port 3 G1/8

Polarity protected for all electrical connections

Pressure control range 0.06 - 6 bar

Product weight 390 g

Protection class IP65

Repetition accuracy in ± %FS 0.5 %FS

Residual ripple 10 %

Safety instructions VPPE safety position: If the power supply cable is interrupted, output pressure is maintained unregu

Sealing principle Soft

Short circuit strength For all electrical connections

Signal range, analogue input 0 - 10 V

Signal range, analogue output 0 - 10 V

Standard nominal flow rate 800 l/min

Switch output PNP

Temperature coefficient 0.04 %/K

Type of actuation electrical

Type of display 3-digit

Type of display LED display

Type of piloting Piloted